Step 4. Output Measurement Results - HP 8753ES Installation And Quick Start Manual

Step 4. Output measurement results

This example procedure shows how to output (store) measurement results to a disk.
For more information on creating a hardcopy of the measurement results, refer to
the "Printing, Plotting, and Saving Measurement Results" chapter in the User's Guide.
CAUTION Do not mistake the line switch for the disk eject button. If the line switch is
mistakenly pushed, the instrument will be turned off, losing all settings and
data that have not been saved.
1. Insert a DOS- or LIF-formatted disk into the analyzer disk drive. The analyzer does not
support LIF-HFS (hierarchy file system).
2. Press
Save/Recall
measurement results to the analyzer's internal disk drive.
3. Press
RETURN
• Toggle
DATA ARRAY
with the instrument state.
• Toggle
RAW ARRAY
but no error-correction) on disk with the instrument state.
• Toggle
FORMAT ARY
the instrument state.
• Toggle
GRAPHICS
instrument state.
• Toggle
DATA ONLY
device under test. The analyzer will not store the instrument state and
error-correction (measurement calibration). Therefore, the saved data cannot be
retrieved into the analyzer.
NOTE Toggling
Because this type of data is only intended for computer manipulation, the file
contents of a
analyzer.
• Choose
SAVE USING BINARY
• Choose
SAVE USING ASCII
read on a computer.
4. Press
RETURN
Chapter 2
. Choose
SELECT DISK
DEFINE DISK-SAVE
to ON if you want to store the error-corrected data on disk
to ON if you want to store the raw data (ratioed and averaged,
to ON if you want to store the formatted data on disk with
to ON if you want to store user graphics on disk with the
to ON if you want to only store the measurement data of the
to ON will override all of the other save options.
DATA ONLY
save cannot be recalled and displayed on the
DATA ONLY
if you want to store data in a binary format.
if you want to store data in an ASCII format, to later
and the analyzer saves the file with a default title.
SAVE STATE
Quick Start: Learning How to Make Measurements
Learning to Make Transmission Measurements
INTERNAL DISK
.
to save the
2-9