Table of Contents
Advertisement
INSTALL USING LAP-SHOULDER BELT
While holding the shoulder belt tight, slide the shoulder belt strap
4
firmly into Shoulder Belt Lock-Off. Always use the Lock-Off on the
opposite side of where the vehicle seat belt is buckled.
This could damage the Lock-Off and/or the vehicle belt
CHECK YOUR WORK
Hold Base at each side and pull side to side and forward. Base should not
move more than 1" (25 mm) from vehicle seat back or side-to-side.
Check installation before every use!
40
Do NOT pull on shoulder belt after it is positioned in Lock-Off.
Install Child Restraint:
• Installation continued on page 46.
Hide quick links:
Advertisement
Table of Contents
