Advertisement
Wiring identification
C
( SIRIUS control )
D
( AUX-IN )
H
( Line out)
E
B
I
(USB)
(Remote Control)
G
F
(ANT. socket)
(Remote Control)
CONNECTOR
FUSE
Blue
(AUTO ANT)
1A
FUSE
Yellow
( BACK-UP B+ )
10A
Black
( GROUND )
Red
( IGNITION B+ )
White
( Front Left )
White/Black
Green
( Rear Left )
Green/Black
Installation Notes
Applicable to both 2 and 4-speaker connection:
A. Connections
B. Din cable connection for remote control
C. Din cable connection for SIRIUS control
D. AUX-IN
E. CD changer socket
F. Antenna socket
G. Din cable connection for remote control
H. Line out
I. USB
2
145x210mm
(CD changer socket)
A
Red
Gray
Rear Line out
White
Red
Black
Front Line out
White
Gray
( Front Right )
Gray/Black
Violet
( Rear Right )
Violet/Black
Controls
USB & NAND (internal memory) Operation
1. MODE button (3)
Pressing MODE button repeatedly will display the following:
RADIO
USB or NAND
CDC
Note: USB mode defaults first, then you can simply press BAND button to choose
between USB and NAND mode.
2. Operation of Copying from USB to NAND (internal memory)
In USB mode, press and hold SEL button for about 2 seconds until ONE COPY
displays on LCD, use VOL UP/DOWN button to choose ONE or ALL; then press
BAND button to confirm the selection.
- If ALL COPY is selected, the record percent would show as 100
the file recording percentage), and after copy is finished it will beep 3 times.
- If ONE COPY is selected, record percent will display as REC xx
finished
PERCENTAGE will be displayed on LCD.
3. Operation of Deleting File in NAND
In NAND mode, press and hold SEL button for about 2 seconds until ONE DEL
displays on LCD, use VOL UP/DOWN button to choose ONE or ALL, then press
BAND button to confirm the selection. COMPLETE will be displayed on the LCD
after deleting is complete.
4. Searching Folder and File in USB/NAND
In USB or NAND mode, simply press the A.PS button to enter the folder searching
mode. Use the VOL UP/DOWN buttons to choose the folders in the USB or NAND.
At your desired folder, press BAND button to confirm the selection. Then use the
same method to select the file you desired. Once a file is selected, it will
automatically begin to play.
5. Searching Track in USB/NAND
In USB or NAND mode, press and hold A.PS button for about 2 seconds to switch
into searching mode. Use VOL UP/DOWN buttons to choose tracks in the USB or
NAND. At your desired track, press BAND button to confirm the selection.
SIRIUS
AUX
xx (xx means
after copy is
7
Advertisement
