Listening To Fm/Am Radio; Automatic Tuning; Manual Tuning; Improving Poor Fm Reception - LG TS913SS Owner's Manual

5.1ch surround compact receiver system
Hide thumbs Also See for TS913SS:
Table of Contents

Advertisement

28
Operating
Listening to FM/AM
radio
You can listen to FM and AM broadcasts through
the built-in tuner. Before operation, make sure you
have connected the FM and AM antennas to the
unit. (Page 18)

Automatic tuning

1. Press RADIO to select tuner (FM or AM). The last
received station is tuned in.
You can also press FUNCTION on the front
panel.
2. Press TUNING - or TUNING + for more than 2
seconds.
Press TUNING - for more than 2 seconds to scan
from high to low.
Press TUNING + for more than 2 seconds to scan
4
from low to high.
The unit stops scanning whenever a station is
received.
3. Adjust the volume by rotating VOLUME on
the front panel or by pressing VOL +/- on the
remote control.

Manual tuning

Press TUNING - or TUNING + briefl y and repeatedly
on the FM or AM mode to select a station you want.

Improving poor FM reception

Press B (blue) (MONO/STEREO) colored button on
the remote control. This will change the tuner from
stereo to mono and usually improve the reception.

Presetting radio stations

You can preset up to 50 FM or AM stations.
You can easily tune in the stations you often listen
to.
1. Press RADIO to select tuner (FM or AM). The last
received station is tuned in.
You can also press FUNCTION on the front
panel.
2. Tune in the station that you want to preset
using Automatic tuning or Manual tuning.
3. Press ENTER (b).
A preset number fl ashes on the display window
for a few seconds. When a preset number
fl ashes, do the step 4.
4. Press PRESET - or PRESET+ to select a preset
number you want.
If a preset number is not fl ashed before you
select the preset number, start again from the
step 3.
5. Press ENTER (b) again.
The station is stored to the selected preset
number. If a preset number is not fl ashed before
you press ENTER (b), start again from the step
3.
6. Repeat the steps 2 to 5 to preset another
station.

Tuning to preset stations

Before tuning to preset stations, make sure you
preset radio stations.
1. Press RADIO to select tuner (FM or AM). The last
received station is tuned in.
You can also press FUNCTION on the front
panel.
2. Press PRESET - or PRESET+ repeatedly to select
the preset station you want.
Each time you press the button, you can select
a preset station.

Advertisement

Table of Contents
loading

Table of Contents