Download
Share
Print this page
Vermont Castings CF9030 Assembly Procedures
  1. Manuals
  2. Brands
  3. Vermont Castings Manuals
  4. Grill
  5. CF9030
  6. Assembly procedures
Vermont Castings CF9030 Assembly Procedures

Vermont Castings CF9030 Assembly Procedures

Hide thumbs Also See for CF9030:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual See also: User Manual
Step 1: Unpack carton.
Tools Required: Knife or scissors; hammer; Philips or Robertson screwdriver
Use the knife or scissors to cut the strapping on the package, then lift off the cardboard cap.
Remove the cardboard sleeve by lifting it straight over top of the barbecue. Remove and unpack the
enclosed parts boxes. Carefully remove any protective covering from stainless steel parts.
CAUTION: Some exposed edges may be sharp.
CF9030 ASSEMBLY PROCEDURES
Page 1
CF9030 ASSEMBLY
50001515 12/02 Rev.0 En

Advertisement

loading

Related Manuals for Vermont Castings CF9030

Summary of Contents for Vermont Castings CF9030

  • Page 1 CF9030 ASSEMBLY CF9030 ASSEMBLY PROCEDURES Step 1: Unpack carton. Tools Required: Knife or scissors; hammer; Philips or Robertson screwdriver Use the knife or scissors to cut the strapping on the package, then lift off the cardboard cap. Remove the cardboard sleeve by lifting it straight over top of the barbecue. Remove and unpack the enclosed parts boxes.
  • Page 2 CF9030 ASSEMBLY Step 2: Position main grill head. Required: Main Grill Unit. Carefully lay the main grill unit on its back, using the flattened carton cap as a protective surface. This operation is best performed by two (2) people. Use of gloves is recommended.

  • Page 3: Step 5: Assemble Casters

    CF9030 ASSEMBLY Step 4: Assemble Legs to Grill Unit. Required: (8) -20 x 1 ” bolts Position the leg assembly into the base unit until the two round bolt holes align with the thread inserts in the legs, as shown. Ensure the tank hole (on LP models) is at the right hand end of the grill.

  • Page 4: Step 6: Install Front Panel

    CF9030 ASSEMBLY Step 6: Install Front Panel. Required: the Front Panel; (4) Plastic Push-pins Position the Front Panel between the front grill legs, aligning the two (2) holes in the side flanges of the panel with those in the legs. Push a pin into each hole as far as possible, It may be necessary to lightly tap the pins.
  • Page 5 CF9030 ASSEMBLY Step 8: Assemble side shelf brackets. Required: (2) right shelf brackets, (2) left shelf brackets, (4) spring clips Fig. 8a Push a spring clip over the underside end hole in each bracket, as shown (Figs. 8a and 8b).
  • Page 6 CF9030 ASSEMBLY Step 10: Install Internal Components. Sear Plates Warming Required: (3) sear plates, (2) cooking grates, Cooking Rack warming rack Grates Finger Hole Refer to Fig. 10. Place the sear plates into the base unit ensuring that edges with the finger holes face the grill front, and the side edges face down.
  • Page 7 CF9030 ASSEMBLY 11a, b Vermont Castings, Majestic Products reserves the right to make changes in design, materials, specifications, prices and discontinue colors and products at any time, without notice. CF9030 Page 7...
  • Page 8 CF9030 ASSEMBLY CF9030 (Items marked ‘*’ are not shown in the parts illustration) Ref. Description Qty. CF9030 Panel Bottom H3 Assem 50001310 Leg H3 - Final Assem 50001317 Front Panel H3-Blue 50001295 Caster 50000090 Base Assem H3 50001462 Lid Assem - Rear Blk H3...