Advertisement
CF9030 ASSEMBLY
Step 10: Install Internal Components.
Required: (3) sear plates, (2) cooking grates,
warming rack
Refer to Fig. 10.
Place the sear plates into the base unit ensuring that edges
with the finger holes face the grill front, and the side
edges face down.
Position the cooking grates into the base similarly; these
may be turned over to provide a flat surface for delicate
foods.
Set the warming rack into the two supports in the ends of
the rear lid.
Cooking
Grates
Fig. 10
Step 11: Install the LP cylinder
Required: LP gas cylinder (not supplied)
NOTE: Before lighting the grill, refer to the
owner's manual for proper cylinder
specifications, filling requirements,
regulator attachment and leak testing
procedures.
Fig. 11
Page 6
Sear Plates
(LP models only).
Warming
Rack
Finger
Hole
Advertisement
