Advertisement
CF9030 ASSEMBLY
Step 6: Install Front Panel.
Required: the Front Panel; (4) Plastic Push-pins
Position the Front Panel between the front grill legs,
aligning the two (2) holes in the side flanges of the panel
with those in the legs. Push a pin into each hole as far as
possible, It may be necessary to lightly tap the pins.
See Fig. 6.
Fig. 6. (Back view of grill)
Step 7: Install Grease Cup, Cup Holder
and Pan.
Required: Grease pan, grease cup and grease
Assemble the cup holder into grease pan opening
by squeezing the ends in slightly, then releasing.
Place a grease cup into the holder, as shown in
Fig. 7a.
Fig. 7a
Position the grease pan into the back side of the
grill just below the back panel—with the grease cup
at the right end—on the two (2) support rails. Push
the pan in squarely until it settles into the recesses
of the supports (Fig. 7b).
Fig. 7b
Page 4
(Push-pin)
cup holder
Advertisement
