Bosch GLM 100 C Professional Original Instructions Manual page 9

OBJ_BUCH-2007-002.book Page 9 Friday, January 24, 2014 10:46 AM
dangers. Otherwise, there is a dan-
ger of operating errors and injuries.
 Supervise children. This will ensure
that children do not play with the
charger.
 Cleaning and user maintenance of
the battery charger shall not be
made by children without supervi-
sion.
Keep the battery charger away from rain or
moisture. Penetration of water in the battery
charger increases the risk of an electric shock.
 Charge only Li-Ion batteries built into Bosch products.
The battery voltage must match the battery charging
voltage of the charger. Otherwise there is a danger of fire
and explosion.
 Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
 Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself.
Have repairs performed only by a qualified technician
Technical Data
Digital Laser Rangefinder
Article number
Distance measurement
Measuring range (max.)
Measuring range (typical)
Measuring range (typical under unfavourable conditions)
Measuring accuracy (typical)
Measuring accuracy (typical under unfavourable conditions)
Lowest indication unit
Indirect Distance Measurement and Vial
Measuring range
Grade measurement
Measuring range
Measuring accuracy (typical)
Lowest indication unit
General
Operating temperature
Storage temperature
Allowable charging temperature range
Relative air humidity, max.
Laser class
Laser type
Bosch Power Tools
and only using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of an electric
shock.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Product Description and Specifica-
tions
Intended Use
The measuring tool is intended for measuring distances,
lengths, heights, clearances, grades and for the calculation of
areas and volumes. The measuring tool is suitable for measur-
ing indoors and outdoors.
The measuring results can be transmitted to other devices via
Bluetooth® and USB data port (not when operating the meas-
uring tool in the R60 Professional measuring rail).
English | 9
GLM 100 C
3 601 K72 7..
A)
100 m
B)
0.05–80 m
C)
45 m
B)
±1.5 mm
C)
±2.5 mm
0.1 mm
D)
–60° – +60°
D)
0°–360° (4x90°)
E)/G)
±0.2°
0.1°
F)
–10 °C...+50 °C
–20 °C...+50 °C
+5 °C...+40 °C
90 %
2
635 nm, <1 mW
2 609 141 148 | (24.1.14)