Bosch GLM 100 C Professional Original Instructions Manual page 16

OBJ_BUCH-2007-002.book Page 16 Friday, January 24, 2014 10:46 AM
16 | English
– For each calculation, the result of one measurement is
added (e.g. the volume value); for continuous measure-
ments, this would be the displayed measured value in re-
sult line c. The addition of individual measured values from
the measured-value lines a is not possible.
Subtracting Measured Values
To subtract measuring values, press mi-
nus button 5; For confirmation, "–" is in-
dicated on the display. The further proce-
dure is analog to "Adding Measured
Values".
Data Transmission to other Devices
The measuring tool is equipped with a Bluetooth® module,
which enables data transmission via radio technology to cer-
tain mobile terminals/devices with a Bluetooth® interface
(e.g., smartphones, tablets).
For information on the necessary system requirements for a
Bluetooth® connection, please refer to the Bosch website at
www.bosch-pt.de.
For data transmission via Bluetooth®, time delays between
mobile terminal/device and measuring tool may occur. This
can be possible due to the distance between both devices or
the object being measured.
Data transmission to certain other devices with USB interface
is possible via the measuring tool's micro USB port (e.g. to
computers, notebooks). In USB operation, the charging dura-
tion n can be significantly prolonged during data transmis-
sion.
Activating the Bluetooth® Interface for Data Transmission
to a Mobile Terminal/Device
To activate the Bluetooth® interface, press the measuring
tool's Bluetooth® button 13. Make sure that the Bluetooth® in-
terface on your mobile terminal/device is activated.
Special Bosch applications (apps) are available to extend the
functional range of the mobile terminal/device and for simpli-
fication of the data processing. Depending on terminal/de-
vice, these can be downloaded at the respective app stores:
After starting the Bosch application, the connection between
the mobile terminal/device and the measuring tool is estab-
lished. When several active measuring tools are found, select
the appropriate measuring tool. When only one active meas-
uring tool is found, the connection is automatically estab-
lished.
2 609 141 148 | (24.1.14)
Note: When establishing the connection between the meas-
uring tool and the mobile terminal/device (e.g., smartphone,
tablet) the first time (pairing), the measuring tool's PIN code
may be requested. In this case, enter "0000".
The connection status and the active connection are indicat-
ed on the display 1 (l).
When a connection cannot be established within 5 minutes
after pressing the Bluetooth® button 13, the Bluetooth® fea-
ture automatically switches off to save the batteries/re-
chargeable batteries.
When operating the measuring tool in the measuring rail 27,
data transmission is not possible.
Deactivating the Bluetooth® Interface
To activate the Bluetooth® interface, press the Bluetooth®
button 13 or switch the measuring tool off.
When the Bluetooth® interface is deactivated or when the
Bluetooth® connection is interrupted (e.g., because of too
large distance or obstructions between the measuring tool
and the mobile terminal/device as well as electromagnetic
disturbances), Bluetooth® (l) is no longer indicated on the
display.
Data Transmission via USB Interface
Connect the measuring tool to your computer or notebook
with the micro USB cable. After starting the software on your
computer or notebook, a connection is established to the
measuring tool.
To download the current software and for further information,
please refer to the Bosch website at
www.bosch-pt.de.
Note: As soon as the measuring tool is connected to a com-
puter or notebook via the micro USB cable, the lithium ion
battery is charged. The charge duration varies depending on
the charging current.
To recharge the measuring tool as quickly as possible, use the
provided charger, see "Battery Charging".
Working Advice
 The measuring tool is equipped with a radio interface.
Local operating restrictions, e.g. in airplanes or hospi-
tals, are to be observed.
General Information
The reception lens 17 and the laser beam outlet 18 must not
be covered when taking a measurement.
The measuring tool must not be moved while taking a meas-
urement (with the exception of the continuous measurement
and grade measurement functions). Therefore, place the
measuring tool, as far as this is possible, against or on a firm
stop or supporting surface.
Influence Effects on the Measuring Range
The measuring range depends upon the light conditions and
the reflection properties of the target surface. For improved
visibility of the laser beam when working outdoors and when
the sunlight is intense, use the laser viewing glasses 30 (ac-
cessory) and the laser target plate 31 (accessory), or shade
off the target surface.
Bosch Power Tools