Garage Door Opener - Lexus ES300 Owner's Manual

GARAGE DOOR OPENER

The garage door opener (HomeLink
Transceiver) is manufactured under license from
R
HomeLink and can be programmed to operate garage
doors, gates, entry doors, door locks, home lighting
systems, and security systems, etc.
(a) Programming the HomeLink
" 1 Indicator light 2 Buttons
R
The HomeLink in your vehicle has 3 buttons and you can
store one program for each button.
To ensure correct programming into the HomeLink
new battery in the hand held transmitter prior to programming.
The battery side of the hand held transmitter must be pointed
away from the HomeLink
R
Universal
For Canadian users, follow the procedure in "Programming an
entrance gate/Programming all devices in the Canadian
market".
1. Decide which of 3 HomeLink
2. Place your hand held garage transmitter 25 to 75 mm (1 to
R
3 in.) away from the surface of the HomeLink
Keep the indicator light on the HomeLink
programming.
3. Simultaneously press and hold the hand held garage
transmitter button along with the selected HomeLink
4. When the indicator light on the HomeLink
slow to a rapid flash after 20 seconds, you can release both
buttons.
5. Test the operation of the HomeLink
programmed button. If programming a garage door opener,
check to see if the garage door opens and closes.
R
, install a
INTERIOR EQUIPMENT
R
during the programming process.
R
buttons you want to program.
R
.
R
in view while
R
button.
R
changes from a
R
by pressing the newly
Finish
71