Table of Contents
Advertisement
IV . FREESTANDING INSTALLATION
1. STOVE COMPONENTS
The following components are included with
the 52 Bay Fireplace Insert model:
A) 52 Bay Stove
B) Blower Assembly
C) Ash Pan
D) Refractory Firebox Liner
E) Assembly Screws
F) Damper Spring
G) Optional Webbing
H) Pedestal or Brass Legs (4 req) (Not Shown)
FIGURE 5
STOVE COMPONENTS
2. CLEARANCE TO COMBUSTIBLES
The 52 Bay stove must be installed with adequate clearance
from combustible surfaces to ensure safe operation. Refer to
FIGURE 6 to determine the applicable clearances for your
installation.
Rear and side wall clearances depend on two factors:
1. Composition of the wall structure (combustible or non-
combustible materials).
2. Type of stove pipe used to connect the stove to the
chimney or the flue (single or double wall, insulated pipe).
7
Hide quick links:
Advertisement
Table of Contents
