Answer Mode Operation - Sanyo sfx-32 Instruction Manual

39
Answer mode operation
\
The telephone rings.
I
r
2
'G
The line is connected after 2 to 3 rings,
then OGM is released to the caller.
I
I
3
After the OGM, SFX-32 o~erates as follows according to the caller's
purpose.
When the caller is FAX
~utomatic transmission fax>
SFX-32 turns into fax reception mode after the line is connected and
receives fax message automatically.
<Manual transmission fax>
SFX-32 can receive a fax message after releasing OGM by starting
transmission by the caller.
When the caller is telephone
When the caller is a phone call, the SFX-32 can record the Incoming
Messages (lCM) up to 3-minute as a default of factory preset.
The recording time of ICM can be changed. See page 53, 54.
4
After the SFX-32 records a incoming
messages, the answer lamp blinks and
the display shows total number of the
incoming message.
EFCCIEI"-Z+F'0"
"3 '2
001
(Once ICM and/or MEMO is recorded, the
display shows Date/Time and the number of
lCM/MEMO alternately.)
The maximum number of ICM recording is 60 (depend on the time of each
[CM recorded).
The caller's voice is released from speaker while recording.
If you pick up the phone during this time. the recording stops and you can
talk to the caller.
9 When a 6-second of continuous pause (silent) is existed on the line after the
OGM, the SFX-32 switches over to the fax reception mode and releases the
fax tone to the caller.