Answering Reception Mode - Sanyo sfx-32 Instruction Manual

31
Answer reception mode
Use this mode if you want to recewe both phone messages and faxes while
you are away.
1
The built-in phone and connected extension phone (if any) both ring
2 to 3 times.
When an incoming fax signal is
n?ceived:
The SFX-32 automatically switches to the receiving mode.
When a phone
call is
received:
The built-in answering system plays your announcement and then takes
messages.
. The SFX-32 can receive a fax after the built-in telephone answering SyStem
plays the announcement if the caller is trying to send a fax manually.
If there is no incoming voice signal for 6 seconds, the SFX-32 automatically
switches over to the fax receiving mode and sends a fax signal to the caller.
. Be sure to advise callers in your announcement that fax reception takes
place after the message.
Example: Please leave a message or send a fax after you hear the tone.
Fax reception starts.
I** RECEIVING *'
I
For detail of TAS operation, see TAS use, page 38-58.