Placing Batteries - Sanyo sfx-32 Instruction Manual

11
Placing batteries
SFX-32 needs 4 x UM-4 battery which serve as temporary back up in case your
AC power is interrupted. This protects the recorded ICM, MEMO and your own
OGM. To conserve the batteries, always keep the SFX-32 connected to AC
power.
ml
1<
Q
Q
Remove the battery cover located
e/
d
e/
bottom of SFX-32.
\%
\
m
21$K
9
Install 4 batteries (type UM-4).
@ ~~
~
(Pay attension to + , - position.)
~@ ~4
\
~e
\
%< v \"
\
I
.\ \\\
I
FiiiiFl
u
Q
s
Replace the battery cover.
~g
t
@@
\
%
.
\
The recorded ICM, MEMO and/or own OGM can be kept approx. 5 days
without AC power.
4 x type UM-4 battery are included with the unit as an accessory.
, Time to replace the batteries I
When the battery is need to be replaced, a warning message is shown on the
display. This appears only when the SFX-32 is set to ANSWER mode or lCM/
MEMO and/or own OGM has been recorded.
<Warning Messages>
REPLACE BATTERY!
23 Ott.'93 12.00
MEMO O
1
I
(when lCM/MEMO has been recorded.)
The display shows date/time, number of recorded lCM/MEMO (if any) and
"REPLACE BATTERY!" in sequence.
When replacing the batteries, do not remove AC plug from AC outlet.
If you replace the batteries without AC power, the recorded lCM/MEMO and
own OGM are all erased.