Sanyo sfx-32 Instruction Manual page 50

49
4
Hang up the handset when the operation is finished.
If there is no new ICM when entering the code ~ ~, you hear a short beep
3 times and after that, 10 seconds of silent will be presented.
If you need to operate other function, press desired code within 10 seconds,
if not, the line is disconnected.
When other remote operation is required while the ICM is playing, enter the
first digit of the remote code and confirm that the ICM playing is stopped.
If not, repeat entering the first digit until it is stopped.
After the confirmation, enter the second digit of the remote code.