Advertisement

All rights reserved © 2016 SCOTT Sports SA
Distribution:
SSG (Europe) Distribution Center SA, P.E.D. Zone C1, Rue du Kiell 60, 6790 Aubange, Belgium
v6.2/15122016
WWW.SCOTT-SPORTS.COM
SCOTT Sports SA
Route du Crochet 17, CH–1762 Givisiez
Phone: +41 26 460 16 16 | Fax: +41 26 460 16 00
Email: scottsupport@scott-sports.com
SCOTT SPARK MY2017
USER MANUAL
W W W . S C O T T - S P O R T S . C O M

Advertisement

Table of Contents
loading

Summary of Contents for Scott SPARK MY2017

  • Page 1 SCOTT SPARK MY2017 USER MANUAL All rights reserved © 2016 SCOTT Sports SA Distribution: SSG (Europe) Distribution Center SA, P.E.D. Zone C1, Rue du Kiell 60, 6790 Aubange, Belgium v6.2/15122016 W W W . S C O T T - S P O R T S . C O M WWW.SCOTT-SPORTS.COM...
  • Page 2: Table Of Contents

    Geometry/Technical Data Spark 29" Geometry/Technical Data Spark Plus TWINLOC The SCOTT Spark should be adjusted exactly to the individual rider to achieve maximum saftey and fun while riding. Basic Set-Up of Shock & Forks SCOTT recommends that all adjustments be carried out by your local authorized SCOTT dealer.
  • Page 3: Spark Concept

    Hardware linkage 20x10mm The SCOTT Spark RC 700 series was engineered with incredibly light materials. With Seatpost diameter 31 6 a combined weight of 1749 grams, its frame including shock is one of the lightest full Headset bearings: 51 9x40x8 45 °...
  • Page 4: Geometry/Technical Data Spark 27.5

    4.0 in 101.4 mm 4.0 in TRAIL 90.9 mm 3.6 in 90.9 mm 3.6 in 90.9 mm 3.6 in 90.9 mm 3.6 in | 06 ENGLISH ENGLISH 07 | SPARK MY2017 | BIKE USER MANUAL BIKE USER MANUAL | SPARK MY2017...
  • Page 5: Geometry/Technical Data Spark Plus

    3.9 in 100.2 mm 3.9 in TRAIL 100.2 mm 3.9 in 100.2 mm 3.9 in 100.2 mm 3.9 in 100.2 mm 3.9 in | 08 ENGLISH ENGLISH 09 | SPARK MY2017 | BIKE USER MANUAL BIKE USER MANUAL | SPARK MY2017...
  • Page 6: Twinloc

    BASIC SET-UP OF SHOCK & FORKS • IMPORTANT! SCOTT Spark is designed around the BOOST platform so many of the fitted parts: cranks/ Recommended tools for the shock setup: wheels/dropouts/forks differ from traditional cycle parts. Always consult your authorized SCOTT dealer for advice on replacing or repairing any part of your SCOTT bike! The SAG tool that came with your bike.
  • Page 7: Sag

    • REBOUND SHOCK SET-UP Your SCOTT bike will be supplied with a SAG tool to help set up your bikes suspension, these “Rebound” describes the speed the shock returns back to its original length after absorbing SAG tools can be easily clipped on the shock body and fork dust seal.
  • Page 8: Replaceable Rear Dropout

    SCOTT dealer as the rear derailleur may need adjustment, failure to adjust this If you have to change the bearings or pivots please consult your local SCOTT dealer for the correctly may result in accident or damage to your bike.
  • Page 9: Cable Guides And Cabling

    • BB STANDARDS/FD MOUNTING DETAILS The SCOTT SPARK has a Press fit PF92 bottom bracket with an inner diameter of 41mm, this These cable guides are fitted with a single bolt, the fixing torque of this must not exceed is a press fit system and special tools are required for removal and refitting, please contact 0.75-1 N/M.
  • Page 10: Guarantee On Scott Bikes

    How do you make a claim under this limited warranty? To make a claim under this limited warranty, you must notify SCOTT of the claimed defect within the warranty period and timely return the Product to SCOTT at your expense for What is Covered? inspection.

Table of Contents