Saeco Cristallo 600 EVO Use And Maintenance page 52

English
DISPLAY
1.8.3-5
Cooling
1.8.3.6.
MIXER COOL. TIMEOUT
1.8.4.
Capsules Preheating
1.8.4.1.
Operation after(min)
1.8.4.2.
Extra Caps Dose.
1.9.
EV Water Assign
...
1.10.
Clock
...
1.10.1.
Time
08:00
1.10.2.
Date
1.10.3.
Date/time format
1.10.4.
Disable
1.11.
On/Off time
...
1.11.1.
On 1
00:00
1.11.2.
Off 1
00:00
1.11.3.
On 2
00:00
1.11.4.
Off 2
00:00
52
Settings for the pre-cooling of water circuits (cups/mixers).
Before dispensing a cold product, a cold rinse of the circuit must be performed, if:
the circuit for cold products has to be used after the same mixer had been used for hot
products.
Or if:
the circuit remained idle for a longer time than set in the "Mixer Cool. Timeout" option
(circuit tubes after cooler now contain hot water).
The options in this menu allow setting the amount of water used for rinsing each water
circuit and the time of inactivity (expressed in minutes) after which the rinse starts.
Important note:
by setting the time of inactivity to zero pre-cooling is disabled.
Settings for the capsule group preheating cycle.
Time (expressed in minutes) of capsule group inactivity after which the group starts
preheating.
By setting it to 0, the preheating is disabled.
Increase in the water dose (in ml) for the first capsule coffee (the first coffee is intended as
being the one for which the capsule group preheating is activated).
By setting the "W" value in the product list, hot water will be dispensed.
This menu allows choosing the solenoid valve to be used for dispensing
If the "hot water solenoid valve" kit is installed, set the value to 0 (zero) or select the
solenoid valve operating on the desired circuit among the available ones.
Enables setting of the hour, minute, day of the week, day of the month, month and year.
Enables date and time display in US format - enables temperature display in °F
It hides date and time.
If it is set to YES, date and time will not be displayed.
(however, the clock and its relative functions remain active)
Allows setting the vending machine's automatic on and off time ranges over the course of a
week.
Description