Operators' Requirements; Safety Devices - Saeco Cristallo 600 EVO Use And Maintenance

In case
malfunctioning, please refer
only to
personnel of the technical
service.
The Manufacturer declines
any liability for any damage
caused to property or
injury caused to persons as
a result
observe
regulations described here.
4.3

Operators' requirements

Three operators with different skills are required in order
to guarantee the safety of the vending machine:
User
Access to the internal part of the vending machine is
forbidden to the user.
Supply operator
The Maintenance Technician assigns the safekeeping of the
access key to the Supply operator who is in charge of
product supply, external cleaning, and starting up /
stopping of the vending machine.
The Supply Operator is
not authorized to carry out
operations
indicated as being the
duties of the Maintenance
Technician
publication.
of failure or
the qualified
of failure to
the safety
which are
in this
Maintenance Technician
The Maintenance Technician is the only person authorized to intervene
and start programming procedures, and perform adjusting, setting up and
maintenance operations on the vending machine.
Access to the service area is
restricted to persons having
knowledge
experience of the appliance, in
particular as far as safety and
hygiene are concerned.
4.4

Safety devices

The vending machine is equipped with:
• a safety switch on the upper door, which cuts off voltage
to all inside components, whenever the front or upper
(Cristallo 400) door is opened;
• a safety switch located on the dispensing outlet door,
which blocks the nozzle arm cycle whenever the door is
opened.
IS Safety switch
Maintenance Technician
In case of programming or setting up operations only the
Maintenance Technician can intervene by inserting the
relevant key into the safety switch and resetting the
voltage even if the door is open.
English
and practical
21