Options; 10 Specifi C Adjustment; Resetting The Control Unit; 11 Re-Check And Restart - Glow-worm SYSTEMPRO Installation And Servicing

9.10

Options

This menu allows you to adjust the settings of the following
options:
9.10.1 Languages
This menu allows you to change languages after installation.
• From the installation menu> select > options > languages
on the screen
9.10.2 Screen
This menu allows you to adjust the brightness and contrast of
the screen
• From the installation menu> select > options > screen on
the screen
9.10.3 About
This function displays the system's software versions.
• From the installation menu> select > parameters > about
on the screen
10 Specifi c adjustment
10.1

Resetting the control unit

This function allows you to reset the control unit (factory
setting).
The resetting of factory settings is irreversible.
Any customised confi guration of the control unit
will be lost.
• Simultaneously press the buttons
seconds.
• Confi rm by pressing
0020094626_00 - 06/10 - Glow-worm
for 10
.

11 Re-check and restart

• Once the control unit is installed, check the operation.
• Switch the control unit on to ensure that any adjustments
operate correctly and check that the appliance operates
safely.

12 User information

At the end of the installation:
- explain the operation of the equipment and its safety devices
to the user, if necessary provide a demonstration and answer
any questions;
- give the user all the required documentation,
- fi ll in the documents where necessary;
- advise the user of the precautions necessary to prevent
damage to the system, appliance and the building;
- remind the user to service the appliance annually.
INSTALLATION
- 13 -