Adjusting The Bobbin Winding Switch - ELNA eXperience 660 Service Manual

ADJUSTING THE BOBBIN WINDING SWITCH

1. Enter adjusting mode.
2. Remove the top cover (see page 5).
3. Loosen the setscrews to adjust the position of the switch fixing plate.
The sp should show "ON" when the bobbin winder spindle is set to the bobbin winding position,
and/or "OFF" when the bobbin winder spindle is returned to the sewing position.
4. Tighten the setscrew.
5. Attach the top cover.
TO ENTER ADJUSTING MODE
Turn the power on while pressing the
needle up/down button and auto-lock
button.
Bobbin winding shaft
Setscrews
Switch fixing plate
Press the button "5".
(Bobbin winding off)
(Sewing position)
35
MODEL:eXperience 660
(Bobbin winding on)
Bobbin winding position