Download Print this page

Replacing The Fuses - ELNA eXperience 660 Service Manual

Built-in needle threader

Hide thumbs Also See for eXperience 660:

Reference manual (14 pages)

Instruction manual (52 pages)

Table Of Contents

Table of Contents

TO REMOVE:

1. Remove the front covers (see page 8).

2. Remove the printed circuit board "A". Remove the four setscrews and remove the cover from the

printed circuit board "A".

3. Remove the fuse (pry up the fuse with a screwdriver).

NOTE:

1. Replace the printed circuit board "A" if you notice any browning, discoloration, or other abnormalities.

2. Only install fuses with the correct rating.

If the fuse is loose, bend the fuse clips inward to secure the fuse.

FUSE NO.

F2, F3

Setscrews (4)

Print circuit board "A" cover