Bosch KBN Series Installation Manual page 34

34 en | Installation of KBE (Outdoor) Cameras
Figure 6.6 Network Connection
4.
WARNING!
If connecting to a PoE LAN switch, remove the separate AC
power connections from the camera.
Figure 6.7 Power Wire Connection
Reference Description
1
5.
6.
F.01U.215.198 | 4.0 | 2011.01
www.a1securitycameras.com email: sales@a1securitycameras.com
Supply power either via the 24 VAC power connection
(factory-configured), or via the Ethernet cable compliant
with the Power-over-Ethernet (IEEE 802.3af) standard.
Power terminal
Pass the supplied orange string through the mounting foot
of the camera housing and the furnished mount. See
Figure 6.2. A fitting may be used in the mounting foot if
desired.
Attach the end of the string to the Cat5/Cat6 cable and
pull it through the mount and the unused hole in the
mounting foot of the camera housing. See Figure 6.3.
Installation Manual
Available from A1 Security Cameras
KBN & KBE Series Cameras
Bosch Security Systems, Inc.