Introduction This user guide will walk you through how to use and operate the Desktop Viewer Software for your UCIT 4 Camera System. Note: This is a Windows Application. Table of Contents A. Downloading the Desktop Software…………………………………3 B. Removing and Inserting the SD Card…………………………..……3-4 C.
A. Downloading the Desktop Software 1. Go to our website: www.safetytrack.net 2. Hover over the support tab at the top and select Camera Installation and User Manuals. 3. One of the first items listed is the UCIT 4 Channel System. Under “Basic” you will see Desktop SD Card Player.
Insertion: To replace the SD Card, push the SD Card into the slot until you hear a “click”. Let go as you will hear a second “click” telling you that card is in position. (Fig.4) Be sure to close the door once the card is in place. (Fig.5) Twist the silver knob clockwise to tighten the knob down on the SD Card door.
D. Launching the Viewer Software Viewer Layout: After Opening the CARBOX Application you will see a screen similar to above. 1. Compass 7. Tool Bar (ABCDE) A. Snapshot 2. Vehicle Speed 8. Video Playback Tools B. Configuration 3. G-Sensor 9. GPS/Google Maps C.
E. Playback Play back is used to playback the video recorded on to the SD card. Once you select Playback (Section D, No. 7, Letter D on Page 5), you will enter the playback window. Step 1: Select “Removable Storage” and choose the proper drive your SD card is in.
Depending on the configuration of your SD Card. You may see up to 3 different types of events. Two of them will not be overwritten (Push Button and G-Sensor). 1. Record Start - This is general continuous recorded video. This is captured when the Camera System receives power.
Step 1: Assuming you want to backup a video(s) from your SD Card to your PC, you will just need to select the drive your SD is in under “Removable Storage”. Step 2: To the left of the ID # you will see a white box. Check the video(s) you want to backup by clicking in the box.
Page 9
First you will want to select the drive that your Micro SD card is in at the top left of the window. This will unlock the fields to configure the Micro SD Card. 1- Video Format: Choose between D1 or CIF format. D1 being the higher quality format, this is recommended unless you are trying to save storage and sacrifice quality.
Page 10
4- Car Information: Easily identify vehicle information. Vehicle license plate number, model, VIN etc. can be input here to identify this information quickly. 5- UIMode: This will adjust the size of the viewer window. 6- Password: This is a feature of the SD Card encryption, to prevent others from accessing any data.
H. Format When you receive your camera system it will be formatted to the default settings. If you want to clear/format the SD Card from all video data be sure to select the correct drive under “removable storage” then click Format. If you want to clear the formatting and restore to full disk space (just like you purchased it new from the store) choose Restore.
Page 12
finding a video from a particular day at a particular time. If there are any questions about this user guide please contact your sales rep or our support team. Thank you very much. Safety Track - 249 Main St. Belleville MI 48198 - 734-699-7633 ! 1 2...