8-2 THERMISTOR (Gus and liquid piping temperature detection)
OPERATING PROCEDURE
1.Removing the side casing
(1)Open the control panel cover(A), remove the fixing
screws(two) of the securing cover. (Fig. 1)
(2)Pull up the side casing(B). (Fig. 2)
2.Removing the thermistor
(1)Remove the fixing screws (three), remove the
cover (C) and (D). (Fig. 3)
(2)Remove the thermistor (gas)(E) and the thermistor
(liquid)(F). (Fig. 4)
(A)
(B)
Fig.1
(C)
(D)
(E)
(F)
PHOTOS
(B)
Fig.2
Fig.3
Fig.4
18