So-Dimm - Toshiba HD-XA1KN Service Manual

1-2-3. SO-DIMM

1. Remove the top panel and top cover. (Refer to item 1-1-1.)
2. Remove the SO-DIMM (3) in the arrow A direction while extending the board holder claws (2) on the Digital PC board (1)
in the arrow direction.
Note:
• To reinstall the SO-DIMM (3), install it so that its groove (4) fits with the projection (5) of the board holder.
Board holder claws (2)
SO-DIMM (3)
Projection (5)
A
Groove (4)
Digital PC board (1)
Fig. 2-1-9