Sub-Chassis - Toshiba HD-XA1KN Service Manual

1-1-3. Sub-chassis

1. Remove the top panel and top cover. (Refer to item 1-1-1.)
2. Remove the front panel. (Refer to item 1-1-2.)
3. Disconnect the connectors (1), (2), and (3).
4. Disconnect the flexible cables (4), (5), and (6).
5. Disconnect the flexible cable (7) while raising the claws (8) in the arrow A direction.
6. Remove four screws (9).
7. Move the sub-chassis (10) in the arrow direction, release it from the four claws, and then remove it.
Flexible cable (7)
A
Connector (1)
Screws (9)
Gasket
Gasket
Flexible cable
(7)
Claws (8)
Claws
Ferrite core
Connector (2)
Fig. 2-1-3
Flexible cable (4)
Flexible cable (5)
Flexible cable (6)
Connector (3)
Screws (9)
Sub-chassis (10)
Gasket