STEP 2. Familiarize Yourself with the Analyzer Front and
Rear Panels
Analyzer Front Panel
CAUTION
Do not mistake the line switch for the disk eject button. See the figure below. If the
line switch is mistakenly pushed, the instrument will be turned off, losing all settings
and data that have not been saved.
1 LINE (power on/off) switch
2 Display
3 Disk drive
4 Disk eject button
5 Softkeys
6
key
Return
7 STIMULUS function block
Chapter 1
STEP 2. Familiarize Yourself with the Analyzer Front and Rear Panels
8 RESPONSE function block
9 ACTIVE CHANNEL keys
10 ENTRY block
11 INSTRUMENT STATE function block
12
Preset
key
13 PROBE POWER connectors
14 R CHANNEL connectors
15 ES models only:
PORT 1
and
PORT 2
Installing Your Analyzer
ET models only:
REFLECTION
and
TRANSMISSION
1-5