Using The Air Purifier; Understanding The Air Quality Light; Turning On And Off - Philips AC1215 User Manual

4 Using the air
purifier
Understanding the air
quality light
Air quality light
color
Blue
Blue-violet
Red-purple
Red
The air quality light automatically goes
on when the air purifier is switched on,
and lights up all colors in sequence.
After approximately 30 seconds, the
air quality sensors select the color that
corresponds to the surrounding air
quality of airborne particles.

Turning on and off

Note
• Always place the air purifier on a
stable, horizontal, and level surface
with the front of the unit facing
away from walls or furniture.
• For optimum purification
performance, close doors and
windows.
• Keep curtains away from the air
inlet or air outlet.
Air quality level
Good
Moderate
Unhealthy
Very unhealthy
1
Put the plug of the air purifier in the
wall outlet.
2
Touch to switch on the air purifier
(Fig.m).
» The air purifier beeps.
» The air purifier operates under
the auto mode by default.
» After measuring the air
quality for approximately
30 seconds, the air quality
sensor automatically selects
the appropriate air quality light
color.
3
Touch for 3 seconds to switch off
the air purifier.
Note
• If the air purifier stays connected
to the electrical outlet after turning
OFF, the air purifier will operate
under the previous settings when
turned ON again.
• If the air purifier accidentally
shuts off during running, it restarts
automatically and operates under
previous settings when the power
supply is resumed.
EN
7