Operation Instructions; Maintenance - CONCORD 52HED Owner's Manual And Installation Instructions

Your new ceiling fan is now ready to use. Reset your circuit breaker
and restore power to the circuit. See the Operation Instruction below
to review the function of each control on your fan.

Operation Instructions

The pull chain located on the switch housing controls the speeds of
your fan. When the fan is off, pull the chain once for HIGH speed,
twice for MEDIUM speed, three times for LOW speed and fourth time
to turn it OFF again.
The slide switch located on the switch housing controls the direction of
blade rotation. The UP position sets the blades in reverse rotation (air
moves UP). The DOWN position sets the blades in forward rotation
(air move DOWN).
Your fan requires very little maintenance. Cleaning of the housing
should be done with a damp soft cloth, NO CLEANING AGENTS.
On the blades, use a duster or dry cloth because any moisture could
cause the blade to warp.

Maintenance

11