Advertisement
Junction Box
Mounting
Bracket
Canopy
Screw
Hanger Ball
Set Screw
Light Fixture
Motor
Housing
Uplight
Pull Chain
Nord Socket
Fixture
Downlight Pull Chain
12
Washer
Washer
Canopy Screw
Blade to
Arm Screw
Washer
Safety Pin
Blade Arm Holder
Glass Shade
Mounting Plate
Switch Housing
Speed Control Pull Chain
Glass
Shade
Socket Ring
© Great 2000 Enterprises, Inc., 2007 • ALL RIGHTS RESERVED •
No part of this publication may be produced, transmitted, transcribed, stored in a retrieval system, or translated into any language
®
in any form by any means without the written permission of Great 2000 Enterprises, Inc..
Concord Fans and Lighting is a division of Great 2000 Enterprises, Inc.
Your new CONCORD ceiling fan is now ready for use.
Reset your circuit breaker and restore power to the cir-
cuit. See the Operation Instructions below to review the
function of each control on your fan.
Operation Instructions
The pull chain located on the switch housing controls
the speed of your fan. When the fan is OFF, pull the
chain once for HIGH speed, twice for MEDIUM speed,
three times for LOW speed and fourth time to turn it off
again.
The slide switch located on the switch housing (see fig-
ure 15) controls the direction of blade rotation. The
LEFT position sets the blades in REVERSE rotation (air
moves UP). The RIGHT position sets the blades in
FORWARD rotation (air moves DOWN).
Blade
Your fan requires very little maintenance. Cleaning of
the housing should be done with a damp soft cloth (NO
CLEANING AGENTS). On the blades, use a duster or
dry cloth because any moisture could cause the blades
to warp.
Maintenance
Advertisement
