Attach The Mounting Bracket - CONCORD 52HED Owner's Manual And Installation Instructions

Have you
TURNED OFF
the Electricity?
This fan is shipped with 2 downrods. 6" for regular ceil-
ing application and 2" for low ceiling application.
Choose the one that fits your need.
Step 1 Attach the mounting bracket
Loosen the two canopy mounting screws on the
downside face of the mounting bracket. Back
them out about half way. This will allow for
easier installation of the ceiling canopy later.
Install the mounting bracket to the electrical
junction box in the ceiling.
machine screws, two (2) washers, and two (2)
lockwashers (see figure 2).
The mounting bracket has slotted holes to enable
it to move sideways for proper alignment. Make
sure the mounting bracket is centered over the
electrical junction box and that it is securely
attached (see figure 3).
NO MOVEMENT SHOULD OCCUR
BETWEEN THE MOUNTING BRACKET AND
THE ELECTRICAL JUNCTION BOX.
4
Using two (2)
Canopy Mounting
Screw
Slotted Holes
Fig. 1
Junction Box
Fig. 2
Fig. 3