CHAPTER -3: INSTALLING THE MACHINE
For safety purposes, we recommend that you disconnect the plug when the
machine is not going to be used for an extended period of time.
In order avoid electric shocks, do not unplug when your hands are wet.
When disconnecting your machine from the mains supply, always pull from the
plug. Never pull the cord itself.
Fitting the machine undercounter
If you wish to fit your machine undercounter, check whether you have sufficient
space under your countertop and whether the wiring-plumbing is suitable to
do so.1 If you decide that the space under the countertop is suitable for fitting
your machine, remove the worktop as shown in the illustration. 2
Warning:The surface which you place the machine under when removing its
worktop has to be stable to avoid balance problems.
To remove the worktop, remove the screws that hold the worktop which are
located at the rear of the machine; then push the front panel 1 cm from the
front side towards the rear and lift it.