Receive Fax Message; Data Transmission Via Pc; Preparing The Pc For The Transfer Of Data; Sending And Receiving Data - coM.sat ISDN Basic Manual

coM.sat ISDN Basic

4.5.3 Receive fax message

Following standard installation, WinFax Pro remains ready to receive in the
background. This is indicated by a small fax icon in the Windows symbol bar. If a fax
message is now received, the data is automatically passed by coM.sat ISDN Basic to
the PC on which WinFax is installed via the serial port.

4.6 Data transmission via PC

A PC with an installed application that can exchange data (e.g. Hyperterminal) is
connected to the serial port of the coM.sat ISDN Basic. The data exchange is now
carried out from this PC to another device capable of receiving data and vice versa.
The other device can also be a coM.sat ISDN Basic with connected PC and a
program for the exchange of data. It is also possible to connect into the Internet if an
Internet browser (Netscape, Microsoft) is running on the PC connected to the coM.sat
ISDN Basic and the connection with the Internet has been made via GSM.
To transfer data, a SIM card must be used on which the data exchange option has
been authorised.

4.6.1 Preparing the PC for the transfer of data

The program required for the transfer of data must have been installed on the PC to
be used for the transfer.
For example, Hyperterminal can be used for the transfer of data, or even the Internet
browser. As these programs are usually already installed on the PC, no explanation
is given for their installation here.

4.6.2 Sending and receiving data

After calling up the terminal program on the receiver and sender side, the receiver
side is set in the operating mode for receiving calls while the receiver station is
dialled by the sender side. After establishing the link, the data can be exchanged
either by entering directly via the keyboard or by transferring files.
Internet access is achieved by dialling an Internet access by GSM and if necessary
entering a personal access number.

4.7 Servicing / Remote servicing

The coM.sat ISDN Basic TA configuration can be checked in several ways, and the
device firmware can be updated in a similar way. This type of servicing no longer
requires that the TA be uninstalled and opened. The following methods are available.
• Servicing via the USB port of the TA
• Remote servicing per GSM
In both cases, a PC on which the coMsat.exe Windows application has been
installed is required.
created: page: file:
16/01/09 84 coMsat ISDN Basic Manual V2.7.doc
Note Protection Mark according to DIN 34!