Outgoing Calls; Figure 12: Outgoing Calls - coM.sat ISDN Basic Manual

coM.sat ISDN Basic

3.3.6 Outgoing calls

Figure 12: Outgoing calls

A separate card is provided for the configuration of outgoing calls in the same way as
for incoming calls.
The type of speech communication is selected in the "Bearer Capability" box of this
card. The "Accept Speech" option should then be selected if the coM.sat ISDN
Basic is connected to a telephone system to which only ISDN telephones are
connected. If analogue telephones are also used, both options should be selected.
On the other hand, no speech communication is possible if both options are
created: page: file:
16/01/09 34 coMsat ISDN Basic Manual V2.7.doc
Note Protection Mark according to DIN 34!