coM.sat ISDN Basic Manual page 57

coM.sat ISDN Basic
Furthermore, the incoming and outgoing calls are also configured here. You first
define whether "incoming and outgoing calls" are allowed, then whether
"Roaming" (booking into networks abroad) is allowed. To do this, the corresponding
option box next to the relevant text is clicked on.
If the check box "Delete All SMS" is activated, any SMS received will be deleted after
it has been processed. The option "Handle SMS" / "Ignore SMS" determines the
reaction to incoming SMS. In areas, in which many SMS are dispatched for
advertising purposes and with devices with a lot of traffic (where reading and deletion
of SMS can be a nuisance) it is recommended not to react to SMS. If the option is
activated, then SMS are not retrieved from the GSM module. In this case remote
maintenance by SMS is no longer possible!
The option "Direct Extension" enables a special function of specific GSM networks,
e.g. the spanish Telefonica GSM network. In this mode, all numbers called via GSM
get a '#' and the calling MSN appended. This allows the called user to see which
extension tries to call him. If a call from GSM comes in which has a '#' followed by an
MSN in the calling party number information, the gateway directly calls this MSN.
You can also set whether the phone number of the incoming call (CLIP) is to be
transferred to the extension ("Enable CLIP"). Also whether consecutive dialling is
permitted or whether the incoming call is transferred to a preset extension, the
number of which has been entered under "Default Number" (see above). Calling
parties that are recognized as VIP are allowed to dial even if other callers are not if
"Call Default Number" is selected. The option "Call Default, even VIPs" also
disables dialling for these VIPs. If consecutive dialling has been allowed, it is possible
to dial another extension during the first 5 seconds (or whatever time has been set)
after a connection has been established. If nothing is dialled within this period, the
default number is called.
If outgoing calls are allowed, you can select whether the caller number is to be
transmitted or not ("Enable CLIR"). In addition, the maximum length of a number
dialled to GSM can be configured in field "Max. No. Size". This is important if the
option "Direct Extension" is enabled. In this mode, the called number's length
increases by the length of the calling MSN (see above). This increase of length may
cause a number to exceed the limit of the GSM network, therefore the MSN is only
appended if the resulting length is below or equal to the value configured here.
Note: If "Allow Incoming Calls" and "Allow Outgoing Calls" are deactivated, the
channel is blocked for GSM calls.
If the "Call Default Number" option box is activated, the "Default Number" given
above is dialled directly.
The allowed nets displayed at the bottom show which nets the channel can use (or if
it can use all networks). These settings can only be modified if the password is
known (see 3.3.21).
Once a channel is configured properly and the second channel needs almost the
same configuration, use the button "Copy from other channel" in the second
created: page: file:
16/01/09 57 coMsat ISDN Basic Manual V2.7.doc
Note Protection Mark according to DIN 34!