Table of Contents
Advertisement
MAC Address: Config device's WAN MAC address. You can
either enter one manually or click the "Clone MAC" button to
copy your PC's MAC.
Clone MAC: Clicking this button changes device's WAN MAC
address from default to the MAC address of the PC you are
currently on. Don't use this button unless your PC's MAC address
is the one bound by your ISP.
Restore to Factory Default MAC: Restores device's WAN MAC
to factory default.
Note: After you clicked "Restore to Factory Default
MAC", you need to reboot the device to activate it.
4.3.4 DHCP
DHCP Server
DHCP server is enabled on the device by default. The Dynamic
Host Configuration Protocol (DHCP) is an automatic configuration
protocol used on IP networks. If you set all LAN PCs to "Obtain an IP
Address Automatically" and "Obtain DNS server address automatically",
they will automatically load proper TCP/IP settings provided by the
device DHCP server when turned on (including IP address, subnet
- 44 -
ADSL2/2+ Router
Hide quick links:
Advertisement
Table of Contents
