Table of Contents
Advertisement
Quick Links
<
CONTENTS
CONTENTS (ENGLISH)
1
INTRODUCTION
2
UNPACKING
2.1 Contents of a 1-pack
3
CEILING TYPE
3.1 Optional support rails
3.2 Rigid ceiling tiles
3.3 Soft ceiling tiles
3.4 Fixed ceilings
3.5 Cutting the mounting hole
4
INSTALLATION
4.1 First fix
4.2 Second fix
5
TRANSFORMER VERSIONS
6
PAINTING THE LOUDSPEAKER
7
WARRANTY
8
TECHNICAL SPECIFICATIONS
>
PRINT
The Martin Experience
Martin Audio – C516 Ceiling Loudspeaker
MARTIN AUDIO
L O N D O N
GUIDES
Page No
2
2
2
3
3
3
3
3
3
4
4
6
7
7
7
8
Advertisement
Table of Contents
Related Manuals for Martin Audio C516
Summary of Contents for Martin Audio C516
- Page 1 3.4 Fixed ceilings 3.5 Cutting the mounting hole INSTALLATION 4.1 First fix 4.2 Second fix TRANSFORMER VERSIONS PAINTING THE LOUDSPEAKER WARRANTY TECHNICAL SPECIFICATIONS MARTIN AUDIO L O N D O N The Martin Experience Martin Audio – C516 Ceiling Loudspeaker...
-
Page 2: Introduction
100V line (Europe and Japan)/ 70V line (USA) UNPACKING Each C516 is built to the highest standard and thoroughly tested before it leaves the factory. After unpacking the loudspeaker, examine it carefully for any signs of transit damage and inform your dealer if any such damage is found. -
Page 3: Ceiling Type
Cutting the mounting hole Cut the mounting hole in the ceiling or tile. The hole required for the C516 is 212mm(8.3”) diameter. The back-can requires a clearance height of at least 160mm(6.3”) from the rear surface of the ceiling. -
Page 4: Installation
Install speaker baffle First fix Note: The back-can of the C516 is provided with two 20mm holes. One hole is fitted with a grommet which accepts cables with diameters of 7-10mm and provides light strain relief (see Fig. 1). The other 20mm hole is fitted with a blanking plug. - Page 5 (see Fig. 3). Fig. 3 7. Tighten the wing nut on the stud. This will sandwich the ceiling between the support bracket and the front lip of the can. Martin Audio – C516 Ceiling Loudspeaker...
-
Page 6: Second Fix
5. Rotate the baffle slightly so that the port is clear of the spring and will not foul it. Gently push the baffle upwards (see Fig. 5). The spring action will draw the baffle into the can once past its initial resistance. Fig. 5 Martin Audio – C516 Ceiling Loudspeaker... -
Page 7: Painting The Loudspeaker
Fig 6 PAINTING THE LOUDSPEAKER Both the outer rim and grille of the C516 may be painted if required and the grille can be removed to make this easier. If the grille is to be painted, it is important that a spray can is used rather than a brush, as this will tend to clog the holes. -
Page 8: Technical Specifications
(W) 300mm x (H) 200mm x (D) 300mm (W) 11.8ins x (H) 7.9ins x (D) 11.8ins SHIPPING WEIGHT C516 2.5kg (5.5lbs) SHIPPING WEIGHT C516T 3.2kg (7.1lbs) Due to our policy of continuous improvement all specifications are subject to change without notice. Martin Audio – C516 Ceiling Loudspeaker... - Page 9 < > CONTENTS PRINT GUIDES C516 Ceiling Loudspeaker Please Click here to return to main menu Please Click here to visit our website MARTIN AUDIO L O N D O N The Martin Experience Century Point, Halifax Road, Cressex Business Park, High Wycombe, Buckinghamshire HP12 3SL, England.
- Page 10 < > CONTENTS PRINT GUIDES C516 Ceiling Loudspeaker User’s Guide ENGLISH MARTIN AUDIO L O N D O N The Martin Experience...
Need help?
Do you have a question about the C516 and is the answer not in the manual?
Questions and answers