Ruida Technology RDC6332G User Manual
  1. Manuals
  2. Brands
  3. Ruida Technology Manuals
  4. Controller
  5. RDC6332G
  6. User manual

Ruida Technology RDC6332G User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

RDC6332G Controller User Manual
Shenzhen RuiDa Technology CO., LTD
Tel: 86- 0755-26066687
Fax: 86-0755-26982287
Web: www.rd-acs.com
E-Mail: support@rd-acs.com
Add: 1B-1, Building 5, Tian'an Nanyou Industry Area,
Dengliang Road, Nanshan District, Shenzhen, P.R.C.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RDC6332G and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Ruida Technology RDC6332G

Summary of Contents for Ruida Technology RDC6332G

  • Page 1 RDC6332G Controller User Manual Shenzhen RuiDa Technology CO., LTD Tel: 86- 0755-26066687 Fax: 86-0755-26982287 Web: www.rd-acs.com E-Mail: support@rd-acs.com Add: 1B-1, Building 5, Tian'an Nanyou Industry Area, Dengliang Road, Nanshan District, Shenzhen, P.R.C.

  • Page 2: Table Of Contents

    5.1 Digital Laser Power Supply of Glass Tube............19 5.2 Analog Laser Power Supply of Glass Tube............19 5.3 RF CO2 Laser..................... 20 Chapter 6 Step-servo Motor Driver Interface Examples....21 6.1 Overview......................21 2 / 47 © 2015 Ruida Technology. All Rights Reserved...
  • Page 3 8.4.1 Memory file....................38 8.4.2 Udisk file......................39 8.5 Introduction to diagnoses function..............40 8.6 Introduction to alarm info................40 Chapter 9 Manufacturer/User Parameters Explanation....41 9.1 Manufacturer Parameters..................41 9.2 User Parameters....................44 3 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 4: Copyright Declaration

    2. Ruida Technology is entitled to increase or reduce and modify the products and functions of this product stated herein as well as amend any documents attached to this product, without prior notification.

  • Page 5: Chapter 1 Overview

    Chapter 1 Overview 1.1 Briefing RDC6332G system is a new generation system for control of laser engraving and cutting, which is developed by RD Co., Ltd. This system has high hardware stability, high voltage resistance or antistatic capability, and friendly 320*240 TFT man-machine display based on Linux.

  • Page 6: Comparison Of Controller Performance

    YES (the work time accurate to Preview 1ms) Online Updata Controller Program Display Online Feature Modification Laser Power/Speed Offline Modification Layer parameters Online Updata Startup Display File dynamic/static preview Modification Factory/User’s 6 / 47 © 2015 Ruida Technology. All Rights Reserved...
  • Page 7 3 (Z axes is configurable to flat or feedin axes） Encryptio Null Encryption Realtime clock battery n Feature based on the PC integrated hardware time encryption Communi USB2.0 USB2.0 10/100MHZ Ethernet or USB2.0 cation Mode 7 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 8: Chapter 2 Installation Size

    RDC6332G Control System User Manual Chapter 2 Installation Size 2.1 Installation Size of Controller The unit of all sizes is millimeter (mm) and the size accurate to 0.1mm. Figure: 2.1-1 8 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 9: Size Of Panel

    RDC6332G Control System User Manual 2.2 Size of Panel The unit of all sizes is millimeter (mm) and the size accurate to 0.1mm. Figure: 2.2-1 9 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 10: Chapter 3 Controller Pictures And Interfaces

    Chapter 3 Controller Pictures and Interfaces 3.1 Pictures of Controller For more detailed pin description, see the Chapter 4: Description of Interface Signal for Controller. Figure: 3.1-1 Picture of Controller 10 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 11: Pictures Of Panel

    RDC6332G Control System User Manual 3.2 Pictures of Panel 11 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 12: Chapter 4 Description Of Controller Interface Signal

    Controller P+ connect to panel P+，Controller P- connect to panel P-. Caution 4.3 Panel Signal-Cable Interface HDI HDI is a normative DB15 interface, using the DB15 cable provided by factory to connect the mainborad and the panel. 12 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 13: Reserved Interface Hmi

    USB interface is a USB-BM, which the controller can communicate with PC by USB2.0. 4.7 Ethernet Interface Using this interface, the controller can communicate with PC by 10/100MHZ Ethernet. Pin to Pin Ethernet parallel line is recommended. Caution 13 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 14: General Output Port Cn2

    24V; if it is powered with 36 V power supply, this pin should be 36V.) All outputs are isolated through the opto-isolator, and 500mA current for each, OC gate output, each can directly drive the 6V/24V relay. Prompt 14 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 15: 3-Axle Spacing And Special Input Interface Cn3/Cn4

    LmtZ- The spacing from axle Z- and Z to 0 coordinate LmtZ+ The spacing from axle Z- and Z to max. coordinate O 5V External power source + 5V (output) 15 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 16: X/Y/Z-Axle Motion Drive Interface

    Upon the correction, the reset key can be pressed against to reset the controller. 16 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 17: Laser Power Control Interface Cn6/Cn7

    Please make corrective choice of laser type. After the option for laser type is modified, the controller should be reset so Prompt that the modification can be effected after resetting. 17 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 18: Water Protect Input Interface Cn5

    2 is not enabled, the controller will not detect the input port of water protector 2 and the user not connect the water protector 2. L-IN3 General input with the function reserved. Laser power 5V positive (output) 18 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 19: Chapter 5 Laser Power Interface Examples

    RDC6332G Control System User Manual Chapter 5 Laser Power Interface Examples 5.1 Digital Laser Power Supply of Glass Tube 5.2 Analog Laser Power Supply of Glass Tube 19 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 20: Rf Co2 Laser

    RDC6332G Control System User Manual 5.3 RF CO2 Laser 20 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 21: Chapter 6 Step-Servo Motor Driver Interface Examples

    In addition to that the correct wiring scheme of this controller and motor driver is provided, it is recommended to use the common-anode connection in all wiring schemes. 21 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 22: Valid Rising Edge For Pulse Signal

    3ND556 and MD556, Figure 6.2-1 and 6.2-2 show the wiring scheme of RD controller and Leadshine driver. Figure: 6.2-1 Four Inputs, Valid Rising Edge and Common Anode Connection 22 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 23: Valid Falling Edge For Pulse Signal

    Figure: 6.3-1 Four Inputs, Valid Falling Edge and Common Anode Connection Figure: 6.3-2 Four Inputs, Valid Falling Edge and Differential Connection (2). The drivers with common-anode input signals include YKA2304ME from Shenzhen YAKO Automation Technology Co., Ltd., Q2HB34MB and 23 / 47 © 2015 Ruida Technology. All Rights Reserved...
  • Page 24 RDC6332G Control System User Manual Q2HB44MA(B) from Shenzhen Baishan Mechatronics Co., Ltd. Figure: 6.3-3 Three Inputs, Valid Falling Edge and Common Anode Connection 24 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 25: Chapter 7 Examples Of Io-Port Wiring

    RDC6332G Control System User Manual Chapter 7 Examples of IO-port Wiring 7.1 Input Port The input connection at X/Y minus spacing is exampled. Figure: 7.1-1 Example of Input-port Connection 25 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 26: Output Port

    RDC6332G Control System User Manual 7.2 Output Port Figure: 7.2-1 Example of Output-port Connection 26 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 27: Chapter 8 Operating Instruction Of Panel

     “Reset” Key :Reset the whole system;  “Origin” Key :Set the locating point;  “Laser” Key : Laser tube to emit;  “Frame” Key :To track by the current file’s frame; 27 / 47 © 2015 Ruida Technology. All Rights Reserved...
  • Page 28  “Diagnose” Key :Diagnose the system, such as the limiter status, water protect etc.;  “Esc” Key : To stop work, or shutdown menu;  “Enter” Key : Validate the change; 28 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 29: Introduction To The Interface Functions

    Figure: 8.2-1 This power on screen can be changed by user. If the user-defined graph is downloaded by the PC software, when restart the system, it will show the new graph. 29 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 30: The Main Interface

    File No.: To display the current selected file’s number. 8.2.3 Speed settings Press “Speed” key when the screen is on the main interface, it will show as below: 30 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 31: Max/Min Power Settings

    “Esc” key to invalidate the change and back to the main screen. 8.2.4 Max/Min power settings Press the “Max Power” or the “Min Power” keys when the screen is on the main interface, it will show as below: Figure: 8.2-4 31 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 32: Reset The Axis

    After selecting a file to preview on the main interface, user can press “Enter” key to let the cursor move to the first layer, then “Z+/-” to select the intent layer, user can press “Enter” key to check the selected layer’s parameters, shown as below: 32 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 33: Introduction To Menus

    Press the “Menu” key when the screen is on the main interface, it will show as below: Figure: 8.3-1 Press “Y+/- “to select the intent entry, then press “Enter” Key to check the sub menu. 33 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 34: System Information

    “Write” button and push “Enter” key, then the changed value could be saved. “Lcd type” can’t be changed. There are two options in “Com” label, “Ethernet” and “USB”. If users want to change this 34 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 35: Function Sub Menu

    You can press the “Origin” key and set the origin, and only this origin can become valid. If you select “Yes”, the system will use the 35 / 47 © 2015 Ruida Technology. All Rights Reserved...
  • Page 36  Auto Focus: When the cursor stops at “Auto Focus”, press the Enter key to search for the focus (When there is z-axis, and the z-axis reset function is enabled, the auto-focusing is valid); press the Esc key to return the prior menu. 36 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 37: User Para

    “Read” button is pressed. 8.3.5 Machine para When the cursor is on “Machine para” entry, press “Enter”, the screen will show as below: Figure: 8.3-8 37 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 38: Introduction To File Function

    “Enter” key, the selected file will be previewed on the main interface. Press “Home” when the cursor is on a selected file, the screen will show as below: Figure: 8.4-2 38 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 39: Udisk File

    8.4.2 Udisk file If the “Udisk” entry in figure8.4-1 is pressed, the system will show as figure 8.4-4, and the operation method is all the same as figure 8.4-1 Figure: 8.4-4 39 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 40: Introduction To Diagnoses Function

    8.6 Introduction to alarm info When users are operating the system, or when the machine is running, some alarm information such as water protecting error maybe shows as below: Figure: 8.6-1 40 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 41: Chapter 9 Manufacturer/User Parameters Explanation

    Jump-off Speed: it means the speed of the motion axis in direct start from the idle condition. If this value is excessively large, it will make the motor lose steps, jar and even squeak; if small, it 41 / 47 © 2015 Ruida Technology. All Rights Reserved...
  • Page 42 Laser Type: glass tube, RF laser (not pre-ignition) and RF laser (pre-ignition) are available for selection. Maximum Power 1 Minimum Power 1 Laser PWM Frequency 1 42 / 47 © 2015 Ruida Technology. All Rights Reserved...
  • Page 43 Transmission Mode: generally choose “Belt + step motor”, the control algorithm will be changed a little when other types are selected. Z-axis Function: “platform” and “feeding axis” are optional. 43 / 47 © 2015 Ruida Technology. All Rights Reserved...

  • Page 44: User Parameters

    Acceleration Mode: it is divided into T acceleration and S acceleration. T accelerate will quicken the whole cutting process, but which will result in that its cutting effect is inferior to that of S acceleration. 44 / 47 © 2015 Ruida Technology. All Rights Reserved...
  • Page 45 U- axis Startup Reset You can select “Yes” or “No” in the field of the above four parameters, which is used to confirm whether each axis should be reset on the startup. 45 / 47 © 2015 Ruida Technology. All Rights Reserved...
  • Page 46 Backlash X: The backlash of X-axis, set the value according to the actual machine, accurate to 1 um, if this value is not 0, the control system will make compensation for backlash. 46 / 47 © 2015 Ruida Technology. All Rights Reserved...
  • Page 47 Thank you very much for using the product from Shenzhen RuiDa Technology! All parts of this manual description, all rights reserved by Shenzhen RuiDa Technology Co., Ltd. Without our permission, any company or individual shall not reprint, copy or distribute the content related to this product manual.

Table of Contents

Save PDF