Zephir ZHC1000 Instruction Manual page 4

light lights up, the program starts. Any other button is inactivated except the
"START/STOP" button after a program has begun.
To stop the program, press the "START/STOP" button for approx. 3 seconds
until a beep confirms that the program has been switched off. This feature will
help to prevent any unintentional disruption to the operation of program.
MENU
It is used to set different programs. Each time it is pressed (accompanied by a
short beep) that the program will vary. Press the button continuously the 12
menus will be cycled to show on the LCD display. Select your desired program.
The functions of 12 menus will be explained below.
1. Basic: kneading, rise and baking normal bread. You may also add
ingredients to add flavor.
2. French: kneading, rise and baking with a longer rise time. The bread baked
in this menu usually will have a crisper crust and light texture.
3. Whole wheat: kneading, rise and baking of whole wheat bread. This setting
has longer preheat time to allow the grain to soak up the water and expand.
It is not advised to use the delay function as this can produce poor results.
4. Quick: kneading, rise and baking loaf with baking soda or baking powder.
Bread baked on this setting is usually smaller with a dense texture.
5. Sweet: kneading, rise and baking the sweat bread. For baking the crisp
and sweet bread.
6. Ultra fast-I: kneading, rise and baking 1.5LB loaf in a shortest time.
Usually the bread made is smaller and rougher than that made with Quick
program.
7. Ultra fast-II: the same as above, but applicable for 2.0LB loaf.
8. Dough: kneading and rise, but without baking. Remove the dough and
shaping it to make bread rolls, pizza, steamed bread, etc.
9. Jam: boiling jams and marmalades.
10. Cake: kneading, rise and baking, rise with soda or baking powder.
11. Sandwich: kneading, rise and baking sandwich. For baking light texture
bread with a thinner crust.
12. Bake: only baking, no kneading and rise. Also used to increase the baking
time on selected settings
COLOR
With the button you can select a LIGHT, MEDIUM or DARK color for the crust.
Press this button to select your desired color.
LOAF SIZE
Press this button to select the Loaf size of the bread. Please note the total
operation time may vary with the different loaf size.
DELAY (TIME + or TIME -)
If you want the appliance do not start working immediately you can use this