Table 27: Chassis Viewer For Ex6210 Switches; Table 28: Chassis Viewer For Ex8208 Switches - Juniper EX3300 Hardware Manual

Hide thumbs Also See for EX3300:
Table of Contents

Advertisement

EX3300 Switch Hardware Guide

Table 27: Chassis Viewer for EX6210 Switches

Field
Description
Front View
Temperature
Mouse over the temperature icon to display the temperature of the CB or line card.
Interface status
Select the CB or line card.
In the image, the colors listed below denote the interface status:
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
Mouse over the interface (port) to view more information.
You can view status for the following ports on the SRE module:
USB port—Indicates the USB port for the switch.
NOTE:
EX Series switch.
Management (
device for out-of-band management. There are 2 management ports: fiber and copper. The same
status is displayed for both the
Console port—The console port is used to connect the switch to a management host such as a PC
or a laptop. (You might do this for initial switch configuration.)
CBs support 4 SFP+ uplink ports. Mouse over the interface on the CB for more information.
For 1-Gigabit Ethernet and 10-Gigabit Ethernet ports, the interfaces appear dimmed if no transceiver
is inserted. The chassis viewer displays
Power supplies
Mouse over the power supply icons to display name, status, and description information.
LCD panel
LCD panel configured for the LEDs on the ports. Mouse over the icon to view the current character
display of the master Routing Engine. The EX6210 switch has 2 LCD panels, one for each Routing Engine.
The backup Routing Engine LCD displays
Rear View of the EX6210 Switch
Fan tray
Mouse over the fan tray icon to display information regarding the cooling fans.

Table 28: Chassis Viewer for EX8208 Switches

Field
Description
Front View
44
We recommend that you use USB flash drives purchased from Juniper Networks for your
) port—The management port is used to connect the switch to a management
me0
ports.
me0
Transceiver not plugged-in
when you mouse over the port icon.
.
Backup
Copyright © 2016, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents