Bosch WFT2806GB Instruction Manual And Installation Instructions page 27

Cleaning / Maintenance
Cleaning the suds pump
The pump has to be cleaned:
if the pump is blocked by some foreign
object such as a button or paper clip and
the water cannot be pumped away.
after washing very fluffy items.
Caution. The detergent solution may be
!
scalding hot, so let it cool down first.
Cleaning procedure:
1. Remove base panel from the front of the
machine. Using a coin or screwdriver,
undo the fasteners holding the panel so
that the slots are both horizontal. With
your hands underneath the middle of the
base panel, press slightly upword and
pull out.
2. Remove the discharge hose, pull out the
plug and let the water run out into the
base panel. Repeat the operation as often
as is necessary. If the pump is blocked,
up to 20 liters of water may be drained, so
have a bucket ready.
3. Replace the plug in the discharge hose
and put the hose back in the machine.
4. Unscrew the pump cover.
5. Remove any foreign objects or fibrous de
posit. Clean the inside of the pump. It
must be possible to turn the pump impel
ler.
6. Screw the pump cover back on.
7. Replace the base panel and tighten the
fasteners. The slots must now be vertical.
8. Pour approx. 2 litres water into detergent
compartment I and run the programme 9
(Pumping out). This prevents detergent
from flowing unused into the discharge
system at the next wash.
27