Bosch WFT2806GB Instruction Manual And Installation Instructions page 22

Programme end / switching the machine off
End of programme
The Anti Crease function is automatically
added to the end of all Cotton / Coloureds
programmes, to the Easy care programmes
operating without the "Higher Water Level"
additional function, and to all drying pro
grammes.
To prevent the formation of permanent
creases in the damp, warm laundry, the load
is shifted in regular intervals for up to 30 min
utes after the end of a programme.
The "Anti Crease" control light illuminates.
To remove the laundry, press the "Start" but
ton. The Anti Crease cycle is stopped.
The "End" control light flashes.
When it stops flashing, the porthole can be
opened. Do not press the "Start" button,
because this would restart the programme
cycle.
Remove any foreign matter (e.g. paper
!
clips) from the drum and the rubber seal!
Risk of rusting!
After drying strongly linting laundry, re
move all fluff from the rubber door seal.
Leave the porthole slightly open so that
the machine can dry out.
Switching the machine off
1. Set the programme selector to the
sition. The "On" control light extinguishes.
2. Set the drying time selector to the 0 posi
tion.
3. Turn off the water tap.
22
po