Annual Product Inspection - Leckey Mygo User Instructions

13 Annual Product
Inspection
(Therapist, Technician, Leckey Product
Advisor, Dealer)
Leckey recommend that each product should
be subject to a detailed inspection at least
once a year and every time the product is
reissued for use. This inspection should
be carried out by a technically competent
person who has been trained in the use of
the product and should include the following
checks as a minimum requirement.
1. Check all knobs, nuts, bolts and plastic
buckles are in place, replacing any missing
items. Paying particular attention to the
following items;
> Buckles and Velcro on pelvic bands, knee
straps and wrap around lateral harnesses
> Hip, knee and chest height adjust and lock
securely
> Contracture angle and secondary footplate
angle adjust and lock securely
> Knee supports depth and width adjust and
lock securely
> Head support locks securely
2. Lift the base to check each wheel
individually. Make sure they are moving freely
and remove any dirt from the rubber wheels.
Check that the brakes lock the wheels
securely.
3. Visually check the structure of the product
ensuring there are no signs of fatigue or
cracking around the welds.
4. Visually check the plastic parts of the
product ensuring there are no signs of
fatigue or cracking.
5. Leckey recommend that a written record is
maintained of all annual product inspections.
If in any doubt to the continued safe
use of your Leckey product or if any
parts should fail, please cease using
the product and contact our customer
services department or your local dealer
as soon as possible.