2. Attach the wall bracket (2 screws Ø 7).
3. Hang the indoor unit.
12. HYDRAULIC LINKS
When choosing and installing water pipes, you must consult and observe all current local standards, regulations
and instructions.
12.1. GENERAL RECOMMENDATIONS
You must design the pipe network with the minimum number of bends and keep the number of changes in height
to the strict minimum. This will reduce installation costs and ensure optimum system performance. The pipe network
must include:
²
Stop cocks to isolate the hydraulic circuit during maintenance.
²
manual or automatic bleed valves at the highest point on the water circuit.
²
A suitable system for maintaining water pressure in the circuit (all Aqu@Scop Advance Split DCI
models have an internal expansion tank).
13