Weslo MOMENTUM CT 5.9 User Manual page 10

10. While another person holds the Console (23)
near the Upright (2), connect the console wires
to the Wire Harness (73) and to the Pulse Wires
(84).
Insert the excess wire into the Console (23) or
the Upright (2).
Tip: Avoid pinching the wires. See the lower
drawing. Attach the Console (23) to the
Console Plate (75) with four M4 x 16mm Self-
tapping Screws (52).
11. Finish attaching the Left and Right Handlebars
(85, 86) to the Upright (2) with an M8 x 80mm
Patch Bolt (79) and an M8 Locknut (38).
Tip: While inserting the M8 x 80mm Patch
Bolt (79), avoid pinching or damaging the
wires inside the Upright (2).
Tighten both M8 x 80mm Patch Bolts (79).
10
23
2
23
Avoid pinching
the wires
11
38
85
2
79
10
Console Wires
73, 84
75
52
79
86