Weslo MOMENTUM CT 5.9 User Manual page 12

14. Insert the Pivot Axle (26) into the Upright (2),
and center the Pivot Axle.
Apply a generous amount of the included
grease to both ends of the Pivot Axle (26).
Orient an Upper Body Arm Spacer (47) so that
the arrow points toward the floor. Slide the
Upper Body Arm Spacer onto the Pivot Axle
(26).
Slide a Small Wave Washer (69) onto the Pivot
Axle (26). Then, slide the Right Upper Body
Arm (8) onto the Pivot Axle.
Attach the Right Upper Body Arm (8) with an
M8 x 25mm Patch Screw (56) and an M8
Washer (55).
Slide the right Upper Body Arm Cover (90)
upward. Then, press the tabs on an Axle Cap
(46) into the Upper Body Arm Spacer (47).
Slide the Upper Body Arm Cover (90) down-
ward to cover the M8 x 43mm Button Bolts (not
shown).
Repeat this step for the other side of the
elliptical exerciser.
15. Identify the Right Pedal (14) and the Right
Pedal Arm (12), which are marked with "Right"
stickers, and orient them as shown.
Attach the Right Pedal (14) to the Right Pedal
Arm (12) with three M8 x 14mm Button Screws
(27), three M8 Split Washers (28), and three M8
Washers (55).
Assemble the Left Pedal (not shown) and
the Left Pedal Arm (not shown) in the same
way.
14
6
2
26
15
12
12
Grease
8
69
90
55
47
56
Arrow
14
55
28
27
46