WM-FX271FP
• The equipment can be removed using the following procedure.
Set
Cabinet (front) sub assy
Note : Follow the disassembly procedure in the numerical order given.
2-1. CABINET (FRONT) SUB ASSY
Note : When installing, fit the knobs and switches.
1 Insert the precision screwdriver
(1.4 mm flat-blade) into the slit
at claw A and release the claw.
2 Remove the cabinet (front) sub assy.
(Release all claws B to N in
alphabetical order.)
4
SECTION 2
DISASSEMBLY
Main board
A
cabinet (front) sub assy
cabinet (front) sub assy
F
E
D
C
B
Holder (sub) assy, cassette
Mechanism deck
holder (sub) assy, cassette
Note : When removing the cabinet, put cloth
on the end of a screwdriver or use a
polyacetal driver to avoid damage to
the cabinet.
G
H
I
L
M
N
Belt and Motor
J
K
S716