Menu Selection - Hanatech MULTISCAN P2 User Manual

Hanatech Co., Ltd.
A. Remote control mode
Basically, all the functions and screenplays are the same as when using the gas
analyser alone. You can simply regard that the front control panel of the gas
analyser has transformed to MULTISCAN P2.

1. Menu selection

a Turn on MULTISCAN P2 by pressing the [POWER] key.
And select [1. SCAN] by pressing the [1] key at the initial menu.
Then the car make selection menu follows as below:
2. Operation
Refer to the separate gas analyser manual for detailed functions.
You have to set the gas analyser to be ready for scanner interface by
selecting [Scanner communication mode] after pressing the [MENU] key of
the gas analyser before initiating MULTISCAN P2 & gas analyser interface
function. Refer to the gas analyser manual for further information.
Chapter 6 - 7
Chapter 6