Table of Contents
Advertisement
USER MANUAL
A. Menu Selection
a
Choose [ACTUATION TEST] from the function Selection Menu
b
The name of the actuator to be tested, test method and the test condition
are shown in the display.
conditions may differ in each vehicle.
B. Test Start
1. Selecting Test Item
a
Choose an actuator to test from the menu by using the [▲] and [▼] keys.
b
Check the test conditions and press the [ENTER] key when all the
conditions are met.
2. Testing
a
[TESTING...] message will be displayed during the actuation test
Test method means how the actuation test will be performed. Check
the actual reaction of the actuator
b
In the example below, the injector will stop injecting fuel for 6 seconds
For MULTISCAN P2
Available actuators, test methods and
Chapter 4 - 12
Hide quick links:
Advertisement
Table of Contents
