Hanatech MULTISCAN P2 User Manual page 75

Hanatech Co., Ltd.
V. Connector Location ---------------------------
a The vehicle side OBD2 adapter is easy to find as the location is quite
regular – under the dash, however, the old vehicle side DLC adapters of
OBD generation 1 are located quite randomly and sometimes it is very
difficult to find.
MULTISCAN P2 has the vehicle side adapter location maps for some car
make to aid the user in locating the adapters.
The locations suggested in this function are purely from Hanatech's
experience, therefore, it may contain incorrect information. It is always
highly recommended to refer to the original repair manual published by
the car manufacturers for correct information and there are some makes
which does not have adapter location map for the reason of on going
S/W enhancement.
b Select [CONNECTOR LOCATION] from the vehicle selection menu if the
adapter is not found in the place where it is supposed to be.
A drawing indicating the location of the vehicle side adapter follows. In
the right bottom of the display, the total number of location maps for the
selected car make is indicated. The example below is when Hyundai
motors is selected, and it tells there are total 5 maps.
Chapter 4 - 27
Chapter 4